8 Matching results
RYOBI Multi Tool sparking when turned on
Sparking can occur on new, brushed motor tools due to the brushes within the motor not being worn in. This is not an issue and over time, this will stop occurring - it's caused by friction against the carbon brushes. However, if there are…
Last update: 19/04/2023, 16:27
Can I use RYOBI Multi Tool to remove silicone?
A RYOBI Multi Tool can be used to remove silicone sealant with a compatible blade. We recommend the POWERFIT 52mm 2PC Scraper Blade, which you can purchase separately.
Last update: 19/04/2023, 16:30
RYOBI Multi Tool quick change not working
Remove the battery to ensure no power is provided to the tool. Check for any physical damage to the lever. Clean any debris or material from the lever using a brush as this might be preventing the lever from functioning. Ensure the accessory is…
Last update: 19/04/2023, 16:33
RYOBI Multi Tool doesn’t have enough power
Multi-Functional Tool power
Last update: 18/07/2022, 16:23
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20
How to lock & unlock a RYOBI Dual Bevel Sliding Mitre Saw's handle
The saw's handle is locked down with a pin. Pull down the handle and hold it, then pull the locking pin all the way out. To lock back in, pull the handle down and hold, then push the locking pin all the way in.
Last update: 13/09/2023, 11:26
RYOBI Dual Bevel Sliding Mitre Saw handle is jammed
Its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check the pin is correctly positioned.
Last update: 13/09/2023, 11:43