9 Matching results
RYOBI Drill has no power or is losing power
Check if the battery is charged - if so, try another battery to confirm whether it is the tool or battery that isn’t working. Inspect your Drill for dust build up - if there, we recommend removing debris from your Drill with a clean paint brush,…
Last update: 19/08/2022, 15:49
RYOBI Hammer Drill is permanently in hammer mode
RYOBI Hammer Drill is permanently in hammer mode
Last update: 21/07/2022, 12:56
What size belt & brand fits my Ryobi Cordless Belt Sander?
For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.
Last update: 31/01/2023, 09:51
Why is the belt loose on my Ryobi Belt Sander?
If the belt is loose, even after you push back the tensioning lever of your Ryobi Belt Sander, it is most likely because the belt is too big. Belt Sanders come in several sizes - refer to your owner’s manual to know what size belt fits your model…
Last update: 15/09/2022, 15:05
Why does the motor of my Ryobi Belt Sander get hot?
This could be because the motor is getting hot due to blocks in the tools air vents, which are blocked up with sawdust. These are important for airflow that help keep the motor cool. And if they’re blocked up, it’s easy to clean them out with a…
Last update: 15/09/2022, 15:19
What's the burning smell coming from my electric Ryobi Belt Sander?
From new, electric motors will often have this smell which is normal and will go away after several uses of the tool. It can also occur with excessive use of the tool from extended use. All sanders are typically used for long periods and need a rest…
Last update: 15/09/2022, 15:38
Why did the motor of my Ryobi Belt Sander burn out?
This could be cause the Sander was continually used for lengthy periods with little or no break to allow the motor to cool. All Sanders are typically used for long periods and need a rest every now and again to allow the motor to cool. Otherwise…
Last update: 15/09/2022, 15:21