5 Matching results
Drill Bits slip in RYOBI Drill Driver chuck
Depending on the type of chuck, it’s common for smaller Drill Bits (around 1-3mm or less) not to grip. The Drill Bit may also have dust or liquid on the Bit, which might cause it to slip - this can be prevented by cleaning the end of the Drill Bit…
Last update: 24/08/2023, 14:24
Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck
The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…
Last update: 03/02/2023, 16:01
RYOBI Heat Gun won't heat up
If your RYOBI Heat Gun won't heat up, after turning it on, make sure you've allowed enough time for the gun to prepare itself - as the unit takes 1-2 minutes to heat up. If your Heat Gun is still not reaching the proper temperature, you may need to…
Last update: 12/08/2022, 11:03
RYOBI Heat Gun won't turn on
If your RYOBI Heat Gun won't turn on, check the power outlet is working, ensure the plug is firmly plugged into the power outlet and untangle any knot on the power cord. You should also check your extension lead - make sure that extension leads with…
Last update: 11/08/2022, 10:41
RYOBI Heat Gun is cutting out
If your RYOBI Heat Gun is cutting out, check if the plug of the unit is firmly plugged in, untangle any knot on the cord, and ensure the nozzle of the unit isn't too close to the heating surface and causing it to overheat. You should also check if…
Last update: 10/08/2022, 13:02