How can we help?

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Bit slips out of RYOBI Drill Driver when driving screws

Bits can slip if the tips are very worn or are poor quality. Try inspecting the tip of the Bit to ensure it is not excessively worn. You should also make sure you're using the correct Bit for the fastener. Refer to the fastener packaging for correct…

Last update: 22/08/2022, 17:09

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck

The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…

Last update: 03/02/2023, 16:01

• Grinders
• Angle Grinders
• Getting Started

What size battery is recommended for a RYOBI Angle Grinder?

Cordless Angle Grinders are powerful, energy-hungry tools and, hence, need lots of battery power.  Grinding tasks generally use more battery than cutting tasks, so as a minimum, it’s recommended to use a 4.0Ah battery or higher for optimum runtime…

Last update: 13/09/2024, 10:31

• Grinders
• Angle Grinders
• Application

Can I use a larger disc size with my RYOBI Angle Grinder?

Don’t use a disc larger than the maximum cutting capacity outlined below and in the product user manual, as a larger disc can cause damage to the tool, and potentially harm you or a bystander.

Last update: 13/09/2024, 11:06

• Grinders
• Angle Grinders
• Application

Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?

For RYOBI Angle Grinders with a tool-free locking nut, these models come fitted with a tool-free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. 

Last update: 13/09/2024, 11:30

• Grinders
• Angle Grinders
• Troubleshooting

Why does my RYOBI Angle Grinder keep cutting out?

Angle Grinders are commonly equipped with several user safety and tool protection systems, such as overload, over-temperature, and anti- kickback.

Last update: 13/09/2024, 12:14

• Grinders
• Angle Grinders
• Getting Started

How to fit & remove Angle Grinder disc using tool free locking nut

These instructions apply to RYOBI Angle Grinders with a tool free locking nut (FIXTEC): The locking nut will have a small tab to one side of the centre thread that can flip up, to help lever the locking nut on or off. 

Last update: 13/09/2024, 12:45