10 Matching results
Silicon is running out of RYOBI Caulking Gun tube & fouling
This can happen if the hole that the silicone is being forced out of is too small and the gun’s setting is too high. Generally, the rule of thumb is that the smaller the hole, the lower the setting needs to be on the gun.
Last update: 10/07/2023, 17:16
How to remove the cartridge from a Ryobi ONE+ Caulking Gun
Remove the battery from the Caulking Gun. Then pull back on the handle at the back of the Caulking Gun releasing the plunger from inside the cartridge. Now the cartridge will be able to be removed.
Last update: 20/10/2022, 15:40
Why is caulk leaking out the back of my Ryobi ONE+ Caulking Gun?
This is most likely caused by a blockage in the nozzle, or the content of the cartridge has dried up. Remove and check the nozzle for blockages using the puncture pin attached to the tool. If the cartridge has a blockage, it means the contents have…
Last update: 20/10/2022, 15:56
RYOBI Multi Tool sparking when turned on
Sparking can occur on new, brushed motor tools due to the brushes within the motor not being worn in. This is not an issue and over time, this will stop occurring - it's caused by friction against the carbon brushes. However, if there are…
Last update: 19/04/2023, 16:27
Can I use RYOBI Multi Tool to remove silicone?
A RYOBI Multi Tool can be used to remove silicone sealant with a compatible blade. We recommend the POWERFIT 52mm 2PC Scraper Blade, which you can purchase separately.
Last update: 19/04/2023, 16:30
RYOBI Multi Tool quick change not working
Remove the battery to ensure no power is provided to the tool. Check for any physical damage to the lever. Clean any debris or material from the lever using a brush as this might be preventing the lever from functioning. Ensure the accessory is…
Last update: 19/04/2023, 16:33
RYOBI Multi Tool doesn’t have enough power
Multi-Functional Tool power
Last update: 18/07/2022, 16:23