8 Matching results
RYOBI Biscuit Joiner not cutting well
If your Biscuit Joiner isn't cutting to the desired results, check your blade for any obvious signs of damage or wear and tear (such as broken blade teeth), which can lead to a poor cut and may need replacing.
Last update: 22/08/2022, 17:07
RYOBI Drill has no power or is losing power
Check if the battery is charged - if so, try another battery to confirm whether it is the tool or battery that isn’t working. Inspect your Drill for dust build up - if there, we recommend removing debris from your Drill with a clean paint brush,…
Last update: 19/08/2022, 15:49
RYOBI Hammer Drill is permanently in hammer mode
RYOBI Hammer Drill is permanently in hammer mode
Last update: 21/07/2022, 12:56
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20
What to do if your RYOBI Edger isn't cutting properly
If your RYOBI Edger isn’t cutting properly, check the condition of your blade and raise the height of the blade to reduce the strain on the edger. For 18V or 36V battery, check the battery has charge by pressing the fuel gauge. For AC, turn off the…
Last update: 20/09/2022, 10:21