19 Matching results
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 31/07/2023, 14:20
How to turn RYOBI Air Compressor on and off
Compressors should only be turned on and off from their power button. Switching an Air Compressor off from the power outlet won’t allow for unloading to occur, which will then lead to stalling the Compressor’s electric motor the next time you try to…
Last update: 10/07/2023, 15:10
How to fit or replace a belt on a RYOBI Belt Sander
Belt sanders use a sanding belt which must be fitted correctly. Belt sizes aren't interchangeable, so ensure you're using the correct size belt.
Last update: 18/09/2023, 16:16
What size belt & brand fits my Ryobi Cordless Belt Sander?
For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.
Last update: 31/01/2023, 09:51
How to adjust a RYOBI Belt Sander's belt for tracking
To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any alignment adjustments. But if you notice…
Last update: 29/08/2023, 12:21
How to stop a RYOBI Belt Sander belt from coming off
Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use.
Last update: 29/08/2023, 12:25
Why does the sanding belt rub against the body of my Ryobi Sander?
The sanding belt needs alignment. To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any…
Last update: 15/09/2022, 14:56