17 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
How to assemble the track for a RYOBI 18V Track Saw
To assemble the tracks for your RYOBI Track Saw, follow the instructional video, or steps outlined in the support article.
Last update: 06/10/2023, 12:55
How to install or replace the blades on a RYOBI 18V Track Saw
With the battery removed, start by setting the depth control lever at the top of the saw all the way down to the blade change setting.
Last update: 06/10/2023, 12:55
How to install the riving knife to a RYOBI 18V Track Saw
Adjust the depth control lever to the blade change position. Then locate the blade wrench from the rear of the saw, which is the larger of the two. Insert the wrench through the access hole in the side of guard and loosen the securing fastener.
Last update: 06/10/2023, 12:58