![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
15 Matching results
How to cut metal with a RYOBI Jigsaw
To cut metal, use the correct blade (check packaging). Usually, metal-cutting blades will have finer teeth. It is recommended you practice the speed/pace of cutting metal in an offcut/scrap piece before attempting a cut on your intended work piece.
Last update: 07/02/2023, 16:18
How to make fine cuts with a RYOBI Jigsaw
A 'fine' cut or clean cut is achieved by using the correct fine finish blade. Typically, these blades have a less aggressive tooth pattern. Try to operate the Jigsaw smoothly (not too fast or slow). Practice the correct cutting technique on an…
Last update: 07/02/2023, 16:18
How to clean a RYOBI Jigsaw
Avoid using solvents when cleaning your Jigsaw, as most plastics are susceptible to various types of commercial solvents and could cause damage to your unit. Instead, use a clean cloth or a paint brush to remove any saw dust, dirt or debris.
Last update: 07/02/2023, 16:19
Is there a compatible base plate for a RYOBI Jigsaw?
RYOBI Jigsaws come fitted with a compatible base plate. A no-mark style base plate is not available for our corded units.
Last update: 07/02/2023, 16:19
How to cut a straight line with RYOBI Jigsaw
Using a high-quality, thick blade will always assist in delivering a straight line cut - we recommend the Powerfit 10 Piece HCS Wood Jigsaw Blade. You may want to consider using a straight edge guide and/or a guide bearing to reduce any wayward…
Last update: 24/08/2023, 14:28
How to lock & unlock a RYOBI 18V ONE+ 184mm Mitre Saw's handle
To unlock the handle of a 18V ONE+ 184mm Mitre Saw, pull down the handle and hold it there. The saw handle is locked down with a pin located on the right. Then pull the locking pin all the way out. Slowly bring up the saw handle and then check it…
Last update: 13/09/2023, 10:46
Fix a RYOBI 18V ONE+ 184mm Mitre Saw's jammed handle
If your RYOBI 18V ONE+ 184mm Mitre Saw has a jammed handle, it's possible the saw handle was pulled up or down with it's locking pin not fully in our out and is now obstructing movement. Check that the locking pin is correctly positioned either…
Last update: 13/09/2023, 10:42