How can we help?

• Grinders
• Bench Grinders
• Application

Can you put a steel/wire brush on a RYOBI Bench Grinder?

Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…

Last update: 13/04/2023, 14:35

• Grinders
• Bench Grinders
• Application

Is the RYOBI Bench Grinder compatible with sanding accessories?

The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…

Last update: 13/04/2023, 14:37

• Sanders
• Belt Sanders
• Application

How to fit or replace a belt on a RYOBI Belt Sander

Belt sanders use a sanding belt which must be fitted correctly. Belt sizes aren't interchangeable, so ensure you're using the correct size belt.

Last update: 18/09/2023, 16:16

• Sanders
• Belt Sanders
• Troubleshooting

What size belt & brand fits my Ryobi Cordless Belt Sander?

For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.

Last update: 31/01/2023, 09:51

• Sanders
• Belt Sanders
• Application

How to adjust a RYOBI Belt Sander's belt for tracking

To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any alignment adjustments. But if you notice…

Last update: 29/08/2023, 12:21

• Sanders
• Belt Sanders
• Application

How to stop a RYOBI Belt Sander belt from coming off

Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use. 

Last update: 29/08/2023, 12:25

• Sanders
• Belt Sanders
• Application

Why does the sanding belt rub against the body of my Ryobi Sander?

The sanding belt needs alignment. To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any…

Last update: 15/09/2022, 14:56