13 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
What size battery is recommended for a RYOBI Angle Grinder?
Cordless Angle Grinders are powerful tools that need lots of battery power. Grinding applications generally use more battery than cutting, so as a minimum, it’s recommended to use a 4.0ah battery or higher for optimum runtime and performance.
Last update: 11/08/2023, 14:59
Can I use a larger disc size with my RYOBI Angle Grinder?
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander. For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches. For a…
Last update: 11/08/2023, 15:33
Can I lock a RYOBI Angle Grinder’s switch/paddle on?
The paddle/ switch is not designed to be locked on – this is a safety measure to prevent the tool from working unintentionally. If this feature is not suitable for your application, then RYOBI also offer a 18V ONE+ 125mm Angle Grinder (R18AG1) with…
Last update: 01/08/2023, 09:59
Why does my RYOBI Angle Grinder keep cutting out?
Angle Grinders are commonly equipped with several user safety and tool protection systems, such as overload, over-temperature, and anti- kickback. Consider the following that could be causing the issue: Excess Force, Angle of Application, or a below…
Last update: 11/08/2023, 15:21
How to fit & remove Angle Grinder disc using a pin spanner
If your RYOBI Angle Grinder has a pin spanner locking nut, you'll need a pin spanner to fit and remove the disc. Don’t attempt to remove the disc without one, as it may damage the spindle.
Last update: 29/08/2023, 13:19