How can we help?

• Grinders
• Angle Grinders
• Application

Can I use a larger disc size with my RYOBI Angle Grinder?

Don’t use a disc larger than the maximum cutting capacity outlined below and in the product user manual, as a larger disc can cause damage to the tool, and potentially harm you or a bystander.

Last update: 13/09/2024, 11:06

• Grinders
• Angle Grinders
• Application

How to fit & remove Angle Grinder disc using a pin spanner

These instructions apply to RYOBI Angle Grinders with a pin spanner locking nut. The locking nut has four holes around the centre thread to position the pin spanner

Last update: 13/09/2024, 12:21

• Grinders
• Angle Grinders
• Troubleshooting

Can’t remove cutting disc from Angle Grinder

Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…

Last update: 13/09/2024, 13:29

• Grinders
• Angle Grinders
• Application

What size disc is suitable for a RYOBI Angle Grinder?

The compatible disc size is dependent on your RYOBI Angle Grinder's maximum disc capacity.  Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a…

Last update: 13/09/2024, 13:59

• Power Tool Batteries
• Power Tool Batteries
• Maintenance

How should I store my RYOBI 36V Battery?

Charge your battery to at least 50%. Store your battery in a cool, dry place no warmer than 38℃. Don’t leave it in direct sunlight or in a car during hot weather. When storing your battery, don’t leave it on the charger or in a tool as this may…

Last update: 15/11/2022, 12:04

• Power Tool Chargers
• Power Tool Chargers
• Application

What do the flashing lights mean on RYOBI 36V Single Chargers?

The following LED light indicators explains that status of the battery charge or whether there's a defect for RYOBI 36V ONE+ single port chargers.

Last update: 25/10/2023, 14:05

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough

If you find your nails don't fire deep enough or your brads aren't flush, try the following: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or switch that is on the back…

Last update: 17/09/2024, 18:50