9 Matching results
RYOBI Multi Tool sparking when turned on
Sparking can occur on new, brushed motor tools due to the brushes within the motor not being worn in. This is not an issue and over time, this will stop occurring - it's caused by friction against the carbon brushes. However, if there are…
Last update: 19/04/2023, 16:27
Can I use RYOBI Multi Tool to remove silicone?
A RYOBI Multi Tool can be used to remove silicone sealant with a compatible blade. We recommend the POWERFIT 52mm 2PC Scraper Blade, which you can purchase separately.
Last update: 19/04/2023, 16:30
How to install or change RYOBI Multi Tool blade
To change blades, release the latch by pulling it upwards until the blade holder opens. Ensure the lever is fully released before removing or inserting a new blade. Once the new blade is inserted, pull down the lever until the blade holder snaps…
Last update: 18/09/2023, 09:59
RYOBI Multi Tool quick change not working
Remove the battery to ensure no power is provided to the tool. Check for any physical damage to the lever. Clean any debris or material from the lever using a brush as this might be preventing the lever from functioning. Ensure the accessory is…
Last update: 19/04/2023, 16:33
How to fit or replace a belt on a RYOBI Belt Sander
Belt sanders use a sanding belt which must be fitted correctly. Belt sizes aren't interchangeable, so ensure you're using the correct size belt.
Last update: 18/09/2023, 16:16
What size belt & brand fits my Ryobi Cordless Belt Sander?
For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.
Last update: 31/01/2023, 09:51
How to stop a RYOBI Belt Sander belt from coming off
Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use.
Last update: 29/08/2023, 12:25