600W Jigsaw

A RYOBI Jigsaw can cut ceramic tile and a wide range of other materials - so long as the blade is correct for the application. To cut ceramic tile, use a blade with diamond or carbide teeth, which clearly states that it will cut ceramic tile on the…

You can cut metals, plastic, drywall, and all types of wood with the RYOBI Jigsaws depending on the blade inserted. Check the blade for its cutting and material capacity or packaging on an aftermarket blade.

Avoid using solvents when cleaning your Jigsaw, as most plastics are susceptible to various types of commercial solvents and could cause damage to your unit. Instead, use a clean cloth or a paint brush to remove any saw dust, dirt or debris.

Using a high-quality, thick blade will always assist in delivering a straight line cut - we recommend the Powerfit 10 Piece HCS Wood Jigsaw Blade. You may want to consider using a straight edge guide and/or a guide bearing to reduce any wayward…

To cut metal, use the correct blade (check packaging). Usually, metal-cutting blades will have finer teeth. It is recommended you practice the speed/pace of cutting metal in an offcut/scrap piece before attempting a cut on your intended work piece.

RYOBI Jigsaws don’t require any major assembly to get started. However, the blade isn’t inserted into the Jigsaw when you unbox the unit, so you’ll need to fit the blade correctly before operation.  

A 'fine' cut or clean cut is achieved by using the correct fine finish blade. Typically, these blades have a less aggressive tooth pattern. Try to operate the Jigsaw smoothly (not too fast or slow). Practice the correct cutting technique…

RYOBI Jigsaws come fitted with a compatible base plate. A no-mark style base plate is not available for our corded units.

The Jigsaw may not be cutting straight because the blade might be excessively worn, bent, damaged or not installed correctly. The quality of the blade may also be the cause as inferior quality blades can warp or deform when in use, even if the blade…

The wood may burn if the blade is blunt or not suitable for the job. The Jigsaw may also be moving through the wood/application too slowly or too quickly - this can create heat build-up, which can also increase the chance for burns or scorching in…