36V Pressure Washer Kit (RPW36X50)

Depending on the Pressure Washer you own, the soap dispenser will be located in the front or back. If your Pressure Washer has a feed tube, it's important that when you put the cap back on, that the tube is pushed all the way to the bottom of…

Before you start using your Pressure Washer, you have to prime the line. Ensure the machine is in the off position. Turn on the water supply. Squeeze the trigger until you see a night steady stream of water. Once achieved, the system is primed and…

There could be several reasons why your RYOBI 36V Pressure Washer won't start. Here are some common troubleshooting steps to help you identify and potentially fix the issue.

Discover step-by-step solutions for fixing low or no water pressure issues in your RYOBI Pressure Washer.

If your 36V RYOBI Pressure Washer doesn’t run for long, ensure you’re using a 5.0A battery pack, which will run the machine on high for 20 minutes and 10 minutes on boost.

If your RYOBI Pressure Washer starts then stops straight away, check that the tap is turned on fully, and that there’s enough water pressure coming from the water source. Drawing water from sources like a bucket will not provide enough pressure for…

If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension…

If your RYOBI Pressure Washer won’t dispense soap, ensure that your lance is set to low pressure. To do so, twist the end of the lance and open it to its widest setting to allow a greater water flow at a decreased pressure. Then allow up to 45…

If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…