8 Matching results
RYOBI Petrol Blower Vacuum difficult to start
If you’re having trouble starting your RYOBI Petrol Blower Vacuum, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also…
Last update: 26/08/2022, 10:31
RYOBI Blower Vacuum won’t start
If your RYOBI battery powered Blower Vacuum won’t start, first check if the battery is low. Check the battery has at least 1 solid bar on it’s fuel gauge. If there is a flashing single bar, it's indicating the battery is fully discharged. Recharge…
Last update: 16/08/2023, 11:52
Why has my RYOBI battery-powered Blower Vacuum lost suction?
If your RYOBI Battery powered Blower Vacuum has lost suction and isn’t vacuuming well, make sure the bag is empty and clean, as this can impact the performance of the unit. Also check for debris in the tubes, around the propeller or in the elbow as…
Last update: 01/02/2023, 15:59
RYOBI Blower Vacuum can’t switch between modes
If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.
Last update: 26/08/2022, 14:33
What to do if your RYOBI 18V HP Garden Vacuum & Sweeper won't start
If your RYOBI 18V HP Garden Vacuum & Sweeper won't start, check the battery has charge by pressing the fuel gauge button at the front of it - it needs to have two or more LEDs on. At the top of the handle there is a red LED. If this blinks, it means…
Last update: 13/10/2022, 13:19
Why won't my RYOBI 18V HP Garden Vacuum & Sweeper locking pin wind?
If you find you can't wind the locking pin of your RYOBI 18V ONE+ Garden Vacuum & Sweeper, you need to first push the locking pin in before starting to wind it clockwise.
Last update: 13/10/2022, 14:02
What to do if your RYOBI 18V HP Garden Vacuum & Sweeper suddenly stops
If your RYOBI 18V HP Garden Vacuum and Sweeper suddenly stops, at the top of the handle there is a red LED - if this blinks, it means the locking pin hasn’t been fully tightened. If this happens, check that the pin is finger-tight until the LED goes…
Last update: 13/10/2022, 13:20