5 Matching results
Silicon is running out of RYOBI Caulking Gun tube & fouling
This can happen if the hole that the silicone is being forced out of is too small and the gun’s setting is too high. Generally, the rule of thumb is that the smaller the hole, the lower the setting needs to be on the gun.
Last update: 10/07/2023, 17:16
How to remove the cartridge from a Ryobi ONE+ Caulking Gun
Remove the battery from the Caulking Gun. Then pull back on the handle at the back of the Caulking Gun releasing the plunger from inside the cartridge. Now the cartridge will be able to be removed.
Last update: 20/10/2022, 15:40
How to clean a Ryobi ONE+ Caulking Gun
Before you attempt to clean your Ryobi ONE+ Caulking Gun, remove the battery. We recommend a non-abrasive cleaner, such as mineral spirits. Ensure the spirits have ample time to dry before connecting the battery again.
Last update: 03/02/2023, 15:19
Why is caulk leaking out the back of my Ryobi ONE+ Caulking Gun?
This is most likely caused by a blockage in the nozzle, or the content of the cartridge has dried up. Remove and check the nozzle for blockages using the puncture pin attached to the tool. If the cartridge has a blockage, it means the contents have…
Last update: 20/10/2022, 15:56
How to prevent the contents of a Ryobi ONE+ Caulking Gun nozzle from drying up
To prevent the contents of a Ryobi ONE+ Caulking Gun nozzle from drying up, insert a long flat head nail into the nozzle. Wrap the tip tightly with electrical tape or similar. It's important to keep the cartridge airtight, as it will cure any…
Last update: 20/10/2022, 16:02