6 Matching results
What to do if your RYOBI Lawn Mower isn't catching grass
Firstly, check for blockages. Blockages usually occur in the chute between the mower deck & catcher, which block airflow and prevent grass from being thrown to the back of the catcher. Mowing in wet or unruly conditions are often the cause of this…
Last update: 25/11/2022, 15:09
What to do if your 18V or 36V RYOBI Mower is lacking power
To improve the power of your mower, ensure your battery is fully charged, raise your cutting height setting, walk slower, and wait until your lawn fully dries before mowing. An HP battery such as a 6.0Ah or 9.0Ah will improve your mowers…
Last update: 25/11/2022, 15:00
What to do if your 18V or 36V RYOBI Mower cuts out while mowing
First check that you have a fully charged battery - a fully charged battery maximises runtime and also power, and minimises the chance of your mower cutting out in use. The next thing to check for is the condition of your lawn - for best performance…
Last update: 25/11/2022, 15:05
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31