6 Matching results
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20
How to lock & unlock a RYOBI Dual Bevel Sliding Mitre Saw's handle
The saw's handle is locked down with a pin. Pull down the handle and hold it, then pull the locking pin all the way out. To lock back in, pull the handle down and hold, then push the locking pin all the way in.
Last update: 13/09/2023, 11:26
RYOBI Dual Bevel Sliding Mitre Saw handle is jammed
Its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check the pin is correctly positioned.
Last update: 13/09/2023, 11:43
RYOBI Dual Bevel Sliding Mitre Saw handle won't move
If the saw doesn’t move or move freely, don’t force it as it could damage the tool. Check the handle locking pin is either fully out or fully in place.
Last update: 13/09/2023, 11:48