16 Matching results
12.0AH battery doesn’t work when RYOBI 36V Blower turbo button is pressed
The 12.0Ah HP battery (R36BTY12) isn’t compatible with this Blower model’s turbo function. This is caused by the high output of the HP battery causing the overload protection to activate.
Last update: 29/08/2022, 09:37
What to do if 18V or 36V RYOBI Blower doesn't work
First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.
Last update: 14/07/2023, 11:04
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20
How to assemble the track for a RYOBI 18V Track Saw
To assemble the tracks for your RYOBI Track Saw, follow the instructional video, or steps outlined in the support article.
Last update: 06/10/2023, 12:55
How to install or replace the blades on a RYOBI 18V Track Saw
With the battery removed, start by setting the depth control lever at the top of the saw all the way down to the blade change setting.
Last update: 06/10/2023, 12:55
How to install the riving knife to a RYOBI 18V Track Saw
Adjust the depth control lever to the blade change position. Then locate the blade wrench from the rear of the saw, which is the larger of the two. Insert the wrench through the access hole in the side of guard and loosen the securing fastener.
Last update: 06/10/2023, 12:58
Can I order a replacement RYOBI 18V Track Saw riving knife?
If your riving knife is worn, damaged or lost, you can purchase a replacement at Bunnings from the Special Orders Desk with part number 089240074113.
Last update: 06/10/2023, 13:00