7 Matching results
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20
What to do if your RYOBI Edger isn't cutting properly
If your RYOBI Edger isn’t cutting properly, check the condition of your blade and raise the height of the blade to reduce the strain on the edger. For 18V or 36V battery, check the battery has charge by pressing the fuel gauge. For AC, turn off the…
Last update: 20/09/2022, 10:21
What to do if your RYOBI Edger blade wears too fast
If your RYOBI Edger blade is wearing too quickly, it may be because you’re edging along hard surfaces – slowing down your forward movement speed will help with steadying the edger. Additionally, initial edging on long or overgrown edges or defining…
Last update: 20/09/2022, 10:22
What do I do if my RYOBI Garden Sprayer is leaking?
Ensure all connection points are tightened before use. A leaking sprayer could be a sign of damaged seals. To maintain your seals, ensure you clean your unit after each use and do not store the sprayer with chemicals in the tank. Seals on Garden…
Last update: 20/09/2022, 15:43
What to do if no fluid comes out of your RYOBI Garden Sprayer
Check that the inlet hose is positioned correctly to pick up the solution and that there is enough solution in the tank. Check for blockages in the line or nozzle. With the machine turned off unscrew the nozzle and check for debris blocking the…
Last update: 20/09/2022, 15:53