8 Matching results
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20
What to do if your RYOBI Edger isn't cutting properly
If your RYOBI Edger isn’t cutting properly, check the condition of your blade and raise the height of the blade to reduce the strain on the edger. For 18V or 36V battery, check the battery has charge by pressing the fuel gauge. For AC, turn off the…
Last update: 20/09/2022, 10:21
What to do if your RYOBI Edger blade wears too fast
If your RYOBI Edger blade is wearing too quickly, it may be because you’re edging along hard surfaces – slowing down your forward movement speed will help with steadying the edger. Additionally, initial edging on long or overgrown edges or defining…
Last update: 20/09/2022, 10:22
Troubleshoot RYOBI 36V Power Station that won’t turn on
If your RYOBI 36V Power Station Inverter won’t turn on, check that the battery has been fully charged before using your Inverter. Make sure to press and hold the main power button for 2 seconds.
Last update: 15/09/2022, 11:44
Troubleshoot RYOBI 36V Power Station plug that stops working
If your RYOBI 36V Power Station AC 240V plug doesn’t work, press and hold the AC button for at least two seconds to turn on the Inverter. Alternatively, your Inverter may be overloaded. Disconnect the device and reset your Inverter.
Last update: 15/09/2022, 11:47