How can we help?

• Drills & Drivers
• Hammer Drills
• Troubleshooting

RYOBI Hammer Drill is permanently in hammer mode

Corded Hammer Drill should have a selector on the top of the tool to engage and disengage the hammer function.

Last update: 11/09/2024, 12:20

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Why is my RYOBI Drill Driver slow to drill into brick?

To drill into brick, make sure you’re using a RYOBI Drill with a hammer function, which you can identify by this symbol:

Last update: 11/09/2024, 11:16

• Drills & Drivers
• Impact Drivers
• Troubleshooting

Why is my RYOBI 18V ONE+ Impact Driver stuttering/pulsing?

A RYOBI 18V ONE+ Impact Driver that's stuttering or pulsing when drilling in the reverse direction is normal. This tool has an Auto 'A' mode to drive screws when application specific control is required. The 'A' mode rotates in 6 pulses, moving up…

Last update: 15/09/2023, 14:37

• Drills & Drivers
• Impact Drivers
• Application

How to use a RYOBI Impact Driver's 4 pre-set driving modes

The 18V ONE+ HP Brushless 4 Mode Impact Driver has four preset driving modes for light screw driving, medium-duty and heavy-duty applications. The A mode allows you to drive in the forward and reverse direction for specialty screw driving.

Last update: 15/09/2023, 14:36

• Drills & Drivers
• Impact Drivers
• Troubleshooting

Bit slips out of RYOBI Impact Driver when driving screws

The chuck will accept the bit by clicking it into the chuck. The bit should not be able to be removed by just pulling on the end of it, you will need to lift the sleeve around the chuck to release the bit.

Last update: 11/09/2024, 16:04