7 Matching results
Troubleshoot RYOBI 36V Power Station that won’t turn on
If your RYOBI 36V Power Station Inverter won’t turn on, check that the battery has been fully charged before using your Inverter. Make sure to press and hold the main power button for 2 seconds.
Last update: 15/09/2022, 11:44
Troubleshoot RYOBI 36V Power Station plug that stops working
If your RYOBI 36V Power Station AC 240V plug doesn’t work, press and hold the AC button for at least two seconds to turn on the Inverter. Alternatively, your Inverter may be overloaded. Disconnect the device and reset your Inverter.
Last update: 15/09/2022, 11:47
Troubleshoot RYOBI Power Station if it unexpectedly turns off
Your RYOBI Power Station Inverter may not operate if weather conditions aren’t suitable. Make sure that you’re using the Inverter within a range of -20℃ and 49℃. Also check that the batteries are charged and seated properly.
Last update: 20/09/2022, 10:28
Tools required to install RYOBI LINK to a plasterboard wall
Make sure you have the following tools to install the RYOBI LINK Wall.
Last update: 27/09/2023, 14:25
How to install RYOBI LINK rail to a plasterboard wall
Step-by-step instructions and a how-to video guide on how to install RYOBI LINK Rail/s on a plasterboard or brick wall.
Last update: 27/09/2023, 14:51
How much weight can RYOBI Link hold?
The LINK Rail supports 94kg overall for each rail or 34kg per 280mm. Overall holding weight varies depending on how the rail is fixed to the wall.
Last update: 27/09/2023, 14:53
Can’t tighten screw into anchor when installing RYOBI LINK
This can occur if a Drill Bit larger than 9mm was used & the hole is too big. The maximum Drill Bit & hole size for the RYOBI LINK Wall Anchors is 9mm.
Last update: 27/09/2023, 14:53