How can we help?

• Generators & Inverters
• Inverters
• Troubleshooting

Troubleshoot RYOBI 36V Power Station that won’t turn on

If your RYOBI 36V Power Station Inverter won’t turn on, check that the battery has been fully charged before using your Inverter. Make sure to press and hold the main power button for 2 seconds.

Last update: 15/09/2022, 11:44

• Generators & Inverters
• Inverters
• Troubleshooting

Troubleshoot RYOBI 36V Power Station plug that stops working

If your RYOBI 36V Power Station AC 240V plug doesn’t work, press and hold the AC button for at least two seconds to turn on the Inverter. Alternatively, your Inverter may be overloaded. Disconnect the device and reset your Inverter.

Last update: 15/09/2022, 11:47

• Generators & Inverters
• Inverters
• Troubleshooting

Troubleshoot RYOBI Power Station if it unexpectedly turns off

Your RYOBI Power Station Inverter may not operate if weather conditions aren’t suitable. Make sure that you’re using the Inverter within a range of -20℃ and 49℃. Also check that the batteries are charged and seated properly.

Last update: 20/09/2022, 10:28

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Cannot tighten Drill Driver Bit in RYOBI Drill Driver chuck

Check that the chuck securing screw has potentially loosened – tighten clockwise with a matching bit (PH3 or Torx T30 usually) This occurs when Bits are dropped all the way into the bottom of the chuck.

Last update: 11/09/2024, 16:11

• Drills & Drivers
• Drill Drivers
• Getting Started

What are the settings for on my Ryobi Drill Driver?

The settings are to help with drilling holes & driving screws properly into the desired material.

Last update: 11/09/2024, 17:42

• Drills & Drivers
• Drill Drivers
• Maintenance

How to replace the Drill Chuck

ALWAYS disconnect the tool from power before starting. You will need a PH3 Screwdriver, a 10-13mm Allen key & a Rubber Mallet. To start, locate the internal screw within the centre of the Drill chuck.

Last update: 11/09/2024, 17:52

• Drills & Drivers
• Drills
• Troubleshooting

RYOBI Drill has no power or is losing power

Check the battery charge level – it is normal that a battery will lose some minor power output as the charge level drops. If the charge level is too low, the tool may stop under load. In this case you may need to charge your battery or change…

Last update: 11/09/2024, 12:17