8 Matching results
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
RYOBI 18V or 36V Chainsaw low on power
If your 18V or 36V RYOBI Chainsaw is low on power, check your RYOBI Chainsaw battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged…
Last update: 20/09/2022, 10:48
RYOBI 18V/36V Chainsaw battery doesn't last long enough
Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted, you will experience lower power than a fully charged battery.
Last update: 20/09/2022, 10:49
RYOBI battery-powered Chainsaw won't start
Check your RYOBI Chainsaw battery’s charge level indicator to ensure the battery is fully charged. You should also check the battery is seated correctly in the tool, that the battery isn't too hot. Additionally, always check if the chain brake is…
Last update: 27/01/2023, 17:06
RYOBI 18V/36V Chainsaw charger not working
Ensure battery is correctly inserted in charger. Make sure the battery isn’t hot. RYOBI batteries have overheat protection built into them. If the battery is too hot the charger will not start. Allow the battery to cool.
Last update: 20/09/2022, 10:51
Why does my RYOBI 18V/36V Chainsaw leak oil when not in use?
Oil leaking from a chainsaw is a common occurrence and does not signify an issue with your chainsaw. Oil is pumped through grooves around the chain bar to ensure the chain and bar are lubricated correctly. Therefore it’s common and expected for a…
Last update: 20/09/2022, 10:52