How can we help?

• Sanders
• Belt Sanders
• Troubleshooting

Why does the motor of my Ryobi Belt Sander get hot?

This could be because the motor is getting hot due to blocks in the tools air vents, which are blocked up with sawdust. These are important for airflow that help keep the motor cool. And if they’re blocked up, it’s easy to clean them out with a…

Last update: 15/09/2022, 15:19

• Sanders
• Belt Sanders
• Troubleshooting

What's the burning smell coming from my electric Ryobi Belt Sander?

From new, electric motors will often have this smell which is normal and will go away after several uses of the tool. It can also occur with excessive use of the tool from extended use. All sanders are typically used for long periods and need a rest…

Last update: 15/09/2022, 15:38

• Sanders
• Belt Sanders
• Troubleshooting

Why did the motor of my Ryobi Belt Sander burn out?

This could be cause the Sander was continually used for lengthy periods with little or no break to allow the motor to cool. All Sanders are typically used for long periods and need a rest every now and again to allow the motor to cool. Otherwise…

Last update: 15/09/2022, 15:21

• Sanders
• Belt Sanders
• Troubleshooting

Why does my Ryobi Belt Sander leave grooves in the surface?

If your RYOBI Belt Sander is leaving grooves in the surface, keep the sander as flat as possible and be careful not to tip the sander or change direction because this will only damage your workpiece.

Last update: 15/09/2022, 15:23

• Sanders
• Belt Sanders
• Application

Can you sander plasterboard with a Ryobi Belt Sander?

You can't sand plasterboard walls because Belt Sanders are too aggressive. Not only will they damage the surface itself, but the fine dust can damage the internal motor.

Last update: 15/09/2022, 15:30

• Sanders
• Belt Sanders
• Application

What is the frame used for that came with my Belt Sander?

When fitted this controls the maximum depth you can sand using the depth control dial. It also assist you in sanding flat to the surface and prevent you from gouging in on the front wheel.

Last update: 24/08/2023, 14:14

• Sanders
• Belt Sanders
• Application

How long can the RYOBI Belt Sander run continuously?

All sanders are typically used for long periods and need a rest every now and again to allow the motor to cool. Otherwise over time, it could eventually burn out. As an example, if you used the sander for 30min, give it say a 5-10min rest.

Last update: 15/09/2022, 15:16