28 Matching results
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect sized fasteners will result in the tool jamming or breaking and voiding the warranty. Ensure the nails you use nails compatible with the…
Last update: 17/03/2023, 09:10
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31
How to load nails into a RYOBI 18V 16ga Brad Nailer
Before you begin, make sure that you have 16ga C Brad Nails as any other gauge will damage the Nailer. We recommend the PowerFit C Series Galvanised Brad Nails Project Pack - 4000 Pack. First, disconnect the the battery from the Nailer before…
Last update: 10/07/2023, 17:34
Why doesn't my RYOBI Pole Pruner battery last?
Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged battery. The larger the battery, the longer the chainsaw will run…
Last update: 20/09/2022, 14:49
Why is my 18V/36V RYOBI Pole Pruner not starting?
If your 18V or 36V RYOBI Pole Pruner isn't starting, it may be your battery - check your battery’s charge level indicator to ensure it's fully charged, check the battery is seated correctly and make sure the battery isn't too hot. Also, make sure…
Last update: 20/09/2022, 14:50