![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
16 Matching results
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect sized fasteners will result in the tool jamming or breaking and voiding the warranty. Ensure the nails you use nails compatible with the…
Last update: 17/03/2023, 09:10
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31
How to load nails into a RYOBI 18V 16ga Brad Nailer
Before you begin, make sure that you have 16ga C Brad Nails as any other gauge will damage the Nailer. We recommend the PowerFit C Series Galvanised Brad Nails Project Pack - 4000 Pack. First, disconnect the the battery from the Nailer before…
Last update: 10/07/2023, 17:34
RYOBI Petrol Chainsaw hard to start or doesn’t run correctly
Discover expert solutions to diagnose and fix the challenges of a hard-to-start RYOBI Petrol Chainsaw.
Last update: 12/10/2023, 17:07
Why can't I pull my RYOBI Petrol Chainsaw starter cord?
If your Chainsaw pull cord can't be pulled the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1…
Last update: 20/09/2022, 10:47