![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
16 Matching results
How to cut metal with a RYOBI Jigsaw
To cut metal, use the correct blade (check packaging). Usually, metal-cutting blades will have finer teeth. It is recommended you practice the speed/pace of cutting metal in an offcut/scrap piece before attempting a cut on your intended work piece.
Last update: 07/02/2023, 16:18
How to make fine cuts with a RYOBI Jigsaw
A 'fine' cut or clean cut is achieved by using the correct fine finish blade. Typically, these blades have a less aggressive tooth pattern. Try to operate the Jigsaw smoothly (not too fast or slow). Practice the correct cutting technique on an…
Last update: 07/02/2023, 16:18
How to clean a RYOBI Jigsaw
Avoid using solvents when cleaning your Jigsaw, as most plastics are susceptible to various types of commercial solvents and could cause damage to your unit. Instead, use a clean cloth or a paint brush to remove any saw dust, dirt or debris.
Last update: 07/02/2023, 16:19
Is there a compatible base plate for a RYOBI Jigsaw?
RYOBI Jigsaws come fitted with a compatible base plate. A no-mark style base plate is not available for our corded units.
Last update: 07/02/2023, 16:19
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20