How can we help?

Troubleshoot RYOBI Pressure Washer that stops during use

If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension leads…

Last update: 15/09/2022, 12:13

• Pressure Washers
• Pressure Washers
• Troubleshooting

What to do if you can’t disconnect hose from RYOBI Pressure Washer

If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…

Last update: 15/09/2022, 12:16

• Pressure Washers
• Pressure Washers
• Application

How to set up a RYOBI Pressure Washer

Before you start using your Pressure Washer, you have to prime the line. Ensure the machine is in the off position. Turn on the water supply. Squeeze the trigger until you see a night steady stream of water. Once achieved, the system is primed and…

Last update: 29/08/2023, 12:34

• Pressure Washers
• Pressure Washers
• Application

How to set RYOBI Pressure Washer to dispense soap

Depending on the Pressure Washer you own, the soap dispenser will be located in the front or back. If your Pressure Washer has a feed tube, it's important that when you put the cap back on, that the tube is pushed all the way to the bottom of the…

Last update: 29/08/2023, 12:37

• Drills & Drivers
• Drill Drivers
• Getting Started

What are the settings for on my Ryobi Drill Driver?

The settings are to help with drilling holes & driving screws properly into the desired material.

Last update: 11/09/2024, 17:42

• Drills & Drivers
• Drill Drivers
• Maintenance

How to replace the Drill Chuck

ALWAYS disconnect the tool from power before starting. You will need a PH3 Screwdriver, a 10-13mm Allen key & a Rubber Mallet. To start, locate the internal screw within the centre of the Drill chuck.

Last update: 11/09/2024, 17:52

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Why is my RYOBI Drill Driver slow to drill into brick?

To drill into brick, make sure you’re using a RYOBI Drill with a hammer function, which you can identify by this symbol:

Last update: 11/09/2024, 11:16