How can we help?

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Bit slips out of RYOBI Drill Driver when driving screws

Bits can slip if the tips are very worn or are poor quality. Try inspecting the tip of the Bit to ensure it is not excessively worn. You should also make sure you're using the correct Bit for the fastener. Refer to the fastener packaging for correct…

Last update: 22/08/2022, 17:09

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck

The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…

Last update: 03/02/2023, 16:01

• Chainsaws & Pruning Saws
• Chainsaws
• Troubleshooting

RYOBI 18V or 36V Chainsaw low on power

If your 18V or 36V RYOBI Chainsaw is low on power, check your RYOBI Chainsaw battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged…

Last update: 20/09/2022, 10:48

• Chainsaws & Pruning Saws
• Chainsaws
• Troubleshooting

RYOBI 18V/36V Chainsaw battery doesn't last long enough

Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted, you will experience lower power than a fully charged battery.

Last update: 20/09/2022, 10:49

• Chainsaws & Pruning Saws
• Chainsaws
• Troubleshooting

RYOBI battery-powered Chainsaw won't start

Check your RYOBI Chainsaw battery’s charge level indicator to ensure the battery is fully charged. You should also check the battery is seated correctly in the tool, that the battery isn't too hot. Additionally, always check if the chain brake is…

Last update: 27/01/2023, 17:06

• Chainsaws & Pruning Saws
• Chainsaws
• Troubleshooting

RYOBI 18V/36V Chainsaw charger not working

Ensure battery is correctly inserted in charger. Make sure the battery isn’t hot. RYOBI batteries have overheat protection built into them. If the battery is too hot the charger will not start. Allow the battery to cool.

Last update: 20/09/2022, 10:51

• Chainsaws & Pruning Saws
• Chainsaws
• Troubleshooting

Why does my RYOBI 18V/36V Chainsaw leak oil when not in use?

Oil leaking from a chainsaw is a common occurrence and does not signify an issue with your chainsaw. Oil is pumped through grooves around the chain bar to ensure the chain and bar are lubricated correctly. Therefore it’s common and expected for a…

Last update: 20/09/2022, 10:52