22 Matching results
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to maintain RYOBI Cordless Nailers & Staplers
Learn tips and techniques for maintaining your RYOBI battery-operated nailer or stapler to keep your tool in top condition.
Last update: 13/10/2023, 12:39
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31
How to load nails into a RYOBI 18V ONE+ Airstrike 15ga DA Finish Nailer
Before you begin, make sure that you use 15ga DA Brad Nails, as any other gauge will damage the Nailer. We recommend the PowerFit DA Angle Brad Nails Project Pack. To load the nails, disconnect the battery from the Nailer before loading nails into…
Last update: 18/01/2023, 18:35
Why is my RYOBI Shredder not cutting properly?
If your RYOBI Crushing Shredder isn’t cutting properly, adjust the blade so that there is a gap larger than 1mm between the blade and the crush plate.
Last update: 04/05/2023, 14:47
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27