6 Matching results
Can't connect hose to RYOBI Air Compressor
Check that the couplings on the compressor hose and the tool are matching. If your compressor has a regulator for outlet pressure, you can reduce the pressure to the fitting to make it easier to attach.
Last update: 14/05/2024, 10:17
Why is my RYOBI Air Compressor not starting?
This may be because the Air Compressor’s circuit breaker has tripped due to the unit being turned on from the power/wall outlet rather than the On/Off Power Button on the Compressor. The circuit breaker protects the Compressor’s electric motor from…
Last update: 10/07/2023, 15:46
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 31/07/2023, 14:20
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31