6 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
What to do if RYOBI Petrol Blower runs poorly
If your RYOBI Petrol Blower is running poorly, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also left the choke hold…
Last update: 29/08/2022, 09:33
How to lock & unlock a RYOBI Dual Bevel Sliding Mitre Saw's handle
The saw's handle is locked down with a pin. Pull down the handle and hold it, then pull the locking pin all the way out. To lock back in, pull the handle down and hold, then push the locking pin all the way in.
Last update: 13/09/2023, 11:26
RYOBI Dual Bevel Sliding Mitre Saw handle is jammed
Its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check the pin is correctly positioned.
Last update: 13/09/2023, 11:43
RYOBI Dual Bevel Sliding Mitre Saw handle won't move
If the saw doesn’t move or move freely, don’t force it as it could damage the tool. Check the handle locking pin is either fully out or fully in place.
Last update: 13/09/2023, 11:48