9 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20