11 Matching results
How to fit & remove Angle Grinder disc using a pin spanner
If your RYOBI Angle Grinder has a pin spanner locking nut, you'll need a pin spanner to fit and remove the disc. Don’t attempt to remove the disc without one, as it may damage the spindle.
Last update: 29/08/2023, 13:19
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07
How to connect hose or tool to RYOBI Air Compressor
Learn the easy process of connecting and disconnecting a hose or tool to your RYOBI Air Compressor.
Last update: 12/10/2023, 15:50
What oil to use in RYOBI Air Compressor
For all RYOBI Air Compressors with a wet sump, the specified oils are synthetic oil SAE-30. This type of oil is commonly used in small engines such as outdoor equipment and 4-stroke lawn mowers.
Last update: 09/11/2022, 09:26
How to put oil in a RYOBI Air Compressor
RYOBI Compressors require a synthetic oil SAE-30, commonly found in small petrol engines such as lawn mowers. You require less than 1 litre for topping up. Ensure your unit is secure, sitting on a level surface. The Oil Fill Hole Cap can be found at…
Last update: 09/11/2022, 09:27
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 31/07/2023, 14:20
How to turn RYOBI Air Compressor on and off
Compressors should only be turned on and off from their power button. Switching an Air Compressor off from the power outlet won’t allow for unloading to occur, which will then lead to stalling the Compressor’s electric motor the next time you try to…
Last update: 10/07/2023, 15:10