![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
17 Matching results
Can’t remove cutting disc from Angle Grinder
Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…
Last update: 01/08/2023, 11:27
How to fit a guard to a RYOBI Angle Grinder
It is important that the grinder is always used with a guard fitted, and (if included in your model) the additional clip-on guard if you are cutting. To fit the guard, place the guard on the grinder housing with the grooves aligned (arrow…
Last update: 11/08/2023, 15:29
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07
Can’t secure screwdriver bit in RYOBI Impact Driver
If you can't secure the screwdriver bit into your Impact Driver, check inside the spindle where the Bit is inserted to ensure there are no dirt or obstructions embedded inside that prevent the Bit from sitting correctly. Depending on the Impact…
Last update: 13/04/2023, 17:03
RYOBI Impact Driver lacks power
RYOBI Impact Driver lacks power
Last update: 06/12/2022, 16:26
Can I use a RYOBI Impact Driver on vehicle wheel nuts?
No, you can’t use an Impact Driver on vehicle wheel nuts.
Last update: 06/12/2022, 16:26
RYOBI Impact Driver is not drilling properly
RYOBI Impact Driver is not drilling properly
Last update: 06/12/2022, 16:26