12 Matching results
Why doesn't my RYOBI Pole Pruner battery last?
Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged battery. The larger the battery, the longer the chainsaw will run…
Last update: 20/09/2022, 14:49
Why is my 18V/36V RYOBI Pole Pruner not starting?
If your 18V or 36V RYOBI Pole Pruner isn't starting, it may be your battery - check your battery’s charge level indicator to ensure it's fully charged, check the battery is seated correctly and make sure the battery isn't too hot. Also, make sure…
Last update: 20/09/2022, 14:50
Why is my 18V/36V RYOBI Pole Pruner charger is not working?
If your 18V or 36V RYOBI Pole Pruner charger isn't working, make sure your battery is correctly inserted in charger, and that the battery isn’t hot. RYOBI batteries have overheat protection built into them. If the battery is too hot the charger will…
Last update: 20/09/2022, 14:52
Why does my 18V/36V RYOBI Pole Pruner leak oil when not in use?
Oil leaking is a common occurrence and does not signify an issue with your Pruner. Oil is pumped through grooves around the chain bar to ensure the chain and bar are lubricated correctly. Therefore it’s common and expected to have oil left in these…
Last update: 20/09/2022, 14:53
RYOBI Pressure Washer has low or no water pressure
Discover step-by-step solutions for fixing low or no water pressure issues in your RYOBI Pressure Washer.
Last update: 20/10/2023, 08:50
Troubleshoot RYOBI Pressure Washer that won't dispense soap
If your RYOBI Pressure Washer won’t dispense soap, ensure that your lance is set to low pressure. To do so, twist the end of the lance and open it to its widest setting to allow a greater water flow at a decreased pressure. Then allow up to 45…
Last update: 15/09/2022, 12:09
Troubleshoot RYOBI Pressure Washer that starts then stops straight away
If your RYOBI Pressure Washer starts then stops straight away, check that the tap is turned on fully, and that there’s enough water pressure coming from the water source. Drawing water from sources like a bucket will not provide enough pressure for…
Last update: 15/09/2022, 12:11