28 Matching results
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
RYOBI Blower Vacuum won’t start
If your RYOBI battery powered Blower Vacuum won’t start, first check if the battery is low. Check the battery has at least 1 solid bar on it’s fuel gauge. If there is a flashing single bar, it's indicating the battery is fully discharged. Recharge…
Last update: 16/08/2023, 11:52
Why has my RYOBI battery-powered Blower Vacuum lost suction?
If your RYOBI Battery powered Blower Vacuum has lost suction and isn’t vacuuming well, make sure the bag is empty and clean, as this can impact the performance of the unit. Also check for debris in the tubes, around the propeller or in the elbow as…
Last update: 01/02/2023, 15:59
What is the metal wire inside my RYOBI battery powered Blower Vacuum?
This is an anti-static grounding device inside the unit and is meant to be there. Don’t attempt to remove or alter it.
Last update: 26/08/2022, 14:16
RYOBI Blower Vacuum can’t switch between modes
If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.
Last update: 26/08/2022, 14:33
How to assemble a RYOBI 18V HP Garden Vacuum & Sweeper
First slide the guide wheels on to the lower blower tube. Once on, pulling up this tab allows you to adjust the position of the wheels to best support the bottom of the tool. Then attach this section to the lower vacuum tube by sliding it into…
Last update: 29/08/2023, 09:36