15 Matching results
RYOBI Blower Vacuum won’t start
If your RYOBI battery powered Blower Vacuum won’t start, first check if the battery is low. Check the battery has at least 1 solid bar on it’s fuel gauge. If there is a flashing single bar, it's indicating the battery is fully discharged. Recharge…
Last update: 16/08/2023, 11:52
RYOBI Blower Vacuum can’t switch between modes
If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.
Last update: 26/08/2022, 14:33
RYOBI 2400W Fixed Tube Blower low on power
If your RYOBI 2400W Fixed Tube Blower has low power, it may be because you’re using too many extension leads, or the lead is too long. It is recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 29/08/2022, 10:14
How to adjust the support wheels position for a RYOBI 18V HP Garden Vacuum & Sweeper
To adjust the position of the support wheels on your RYOBI 18V HP™ Garden Vacuum & Sweeper, pull up the tab at the other end to the wheels will allow you to adjust the position of the wheels to best support the bottom of the tool.
Last update: 13/10/2022, 09:53
How to use a RYOBI 18V HP Garden Vacuum & Sweeper
It will be more time efficient if you start by blowing all the leaves in to one area before vacuuming them up. This will not only maximise battery run time, but it will also help dry any slightly damp leaves as you go. - It’s a good idea to avoid…
Last update: 13/10/2022, 14:08
The battery doesn't last long enough with my RYOBI ONE+ Garden Vacuum & Sweeper
If you find the battery doesn't last long enough with my RYOBI ONE+ Garden Vacuum & Sweeper, you may need a larger capacity battery - it's recommended a 6.0Ahr battery or greater is used like the RYOBI 18V One+ 6.0 HP Battery. Vacuuming uses more…
Last update: 21/04/2023, 18:20
What to do if your RYOBI 18V HP Garden Vacuum & Sweeper suddenly stops
If your RYOBI 18V HP Garden Vacuum and Sweeper suddenly stops, at the top of the handle there is a red LED - if this blinks, it means the locking pin hasn’t been fully tightened. If this happens, check that the pin is finger-tight until the LED goes…
Last update: 13/10/2022, 13:20