21 Matching results
How to prevent & clear blockages in a RYOBI 18V HP Garden Vacuum & Sweeper
To prevent blockages, it’s a good idea to avoid vacuuming leaves that are wet. Wait until they have dried out as they can be problematic. For starters, they are much harder to suck up, consuming lots of battery runtime. They tend to clog up in the…
Last update: 13/10/2022, 14:24
Why does my RYOBI 18V HP Garden Vacuum & Sweeper have poor suction?
This could be caused by a blockage in the tube. To check and clear this, first remove the battery. Then remove the main tube and check for any small sticks that might be stuck inside by looking through the tube. These are a common cause of leaves…
Last update: 13/10/2022, 14:32
How to clean the collection bag of a RYOBI 18V HP Garden Vacuum & Sweeper
To clean the collection bag of a RYOBI 18V HP Garden Vacuum & Sweeper, turn the bag inside-out and remove the plastic sleeve. With your garden hose, give it a light spray. Hang it out to dry before using it again.
Last update: 03/02/2023, 15:19
What PPE is recommended when using a RYOBI 18V HP Garden Vacuum & Sweeper
When using a RYOBI 18V HP Garden Vacuum & Sweeper, we recommend eye and ear protection and gloves when your performing maintenance and emptying the collection bag.
Last update: 13/10/2022, 15:33
How to avoid poor/no suction with a RYOBI Wet & Dry Vacuum
If your RYOBI Wet & Dry Vacuum has poor or no suction, it may be because the filter is dirty and needs to be cleaned. It could also be because the filter is too old to be cleaned, and needs to be replaced. We also recommend you check and empty the…
Last update: 03/02/2023, 11:44
How to swap out your RYOBI Wet & Dry Vacuum filter
To swap out the filter that's used for dry pickup for the one used for wet, simply take it off and grab the foam filter designed for wet pickup and slide it over. Make sure you place it on nice and firm so it protects all the insides. If you use the…
Last update: 19/09/2022, 16:43
How to clean your RYOBI Wet & Dry Vacuum & filter
We recommend straight after you use your machine for wet vacuuming, to clean it and have it setup ready for next time - particularly if the next time is to use the dry feature. The first step is to drain all the water out and then wipe and clean the…
Last update: 26/09/2022, 11:41