14 Matching results
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31
Why are there grooves in the timber when using a RYOBI Thicknesser?
If you're getting grooves in the finish surface of the timber when using a RYOBI Thickness Planer (also known as a Thicknesser), it's most likely caused by damage to one or both cutters from a foreign object in the wood like a nail. The cutter/s…
Last update: 02/09/2022, 16:52
Why does my RYOBI Thicknesser stop during use?
If during use your RYOBI Thicknesser just stops, it’s probably because you’re attempting to remove too much material in a single pass, which can overload the motor. Simply hit the stop button, wind up the handle and then press the overload button to…
Last update: 02/09/2022, 16:55
Why are the feed rollers slipping in my RYOBI Thicknesser?
There are several possible causes for this resulting in the rollers requiring replacement from a service agent. It could be caused by general wear if the machine is older or the rollers are damaged from allowing them to do all the work without ample…
Last update: 02/09/2022, 16:57
What to do if your RYOBI Thicknesser blades wear unevenly
If your RYOBI Thickness Planer blades wear unevenly, this can occur from consistently feeding narrow width timbers in at the same position. When planing narrow width timber, try to mix up where you feed it into the machine as this process results in…
Last update: 02/09/2022, 16:58