27 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
Does the 18V ONE+ HP Brushless 30-34° Framing Nailer need air after unboxing?
The 18V ONE+ HP Brushless 30-34° Framing Nailer doesn’t need air when you take it out of the packaging. It’s ready to go straight out of the box.
Last update: 01/05/2023, 09:49
What type & size nails are suitable for the 18V ONE+ HP Brushless 30-34° Framing Nailer?
For the 18V ONE+ HP Brushless 30-34° Framing Nailer, use any brand of 10GA 30-34° clipped head nails from 50mm-90mm in length, with a shank of 2.87 - 3.3mm. The 18V ONE+ HP Brushless 30-34° Framing Nailer is compatible with both smooth and ring…
Last update: 02/05/2023, 17:00
Does the 18V ONE+ HP Brushless 30-34° Framing Nailer need gas cartridges to operate?
The 18V ONE+ HP Brushless 30-34° Framing Nailer Air-Strike system doesn’t need gas cartridges to operate – it just needs compressed air and a ONE+ Battery.
Last update: 01/05/2023, 09:53