8 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
RYOBI Petrol Blower Vacuum difficult to start
If you’re having trouble starting your RYOBI Petrol Blower Vacuum, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also…
Last update: 26/08/2022, 10:31
RYOBI Blower Vacuum can’t switch between modes
If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.
Last update: 26/08/2022, 14:33
What to do if RYOBI Petrol Blower runs poorly
If your RYOBI Petrol Blower is running poorly, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also left the choke hold…
Last update: 29/08/2022, 09:33
Troubleshoot RYOBI 36V Power Station that won’t turn on
If your RYOBI 36V Power Station Inverter won’t turn on, check that the battery has been fully charged before using your Inverter. Make sure to press and hold the main power button for 2 seconds.
Last update: 15/09/2022, 11:44
Troubleshoot RYOBI 36V Power Station plug that stops working
If your RYOBI 36V Power Station AC 240V plug doesn’t work, press and hold the AC button for at least two seconds to turn on the Inverter. Alternatively, your Inverter may be overloaded. Disconnect the device and reset your Inverter.
Last update: 15/09/2022, 11:47