6 Matching results
Bit slips out of RYOBI Drill Driver when driving screws
Bits can slip if the tips are very worn or are poor quality. Try inspecting the tip of the Bit to ensure it is not excessively worn. You should also make sure you're using the correct Bit for the fastener. Refer to the fastener packaging for correct…
Last update: 22/08/2022, 17:09
Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck
The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…
Last update: 03/02/2023, 16:01
Why is my RYOBI Shredder not cutting properly?
If your RYOBI Crushing Shredder isn’t cutting properly, adjust the blade so that there is a gap larger than 1mm between the blade and the crush plate.
Last update: 04/05/2023, 14:47
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
RYOBI AC 2400W Shredder stops working after emptying bin
The RYOBI AC 2400W Crushing Shredder features a microswitch that needs to be activated for the unit to work. Activate the switch by inserting your collection bin and pulling the front handle up.
Last update: 30/08/2022, 08:29