![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
23 Matching results
Troubleshoot RYOBI Pressure Washer that stops during use
If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension leads…
Last update: 15/09/2022, 12:13
Troubleshoot 36V RYOBI Pressure Washer if it doesn't run for long
If your 36V RYOBI Pressure Washer doesn’t run for long, ensure you’re using a 5.0A battery pack, which will run the machine on high for 20 minutes and 10 minutes on boost.
Last update: 15/09/2022, 12:14
What to do if you can’t disconnect hose from RYOBI Pressure Washer
If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…
Last update: 15/09/2022, 12:16
How to set up a RYOBI Pressure Washer
Before you start using your Pressure Washer, you have to prime the line. Ensure the machine is in the off position. Turn on the water supply. Squeeze the trigger until you see a night steady stream of water. Once achieved, the system is primed and…
Last update: 29/08/2023, 12:34
How to set RYOBI Pressure Washer to dispense soap
Depending on the Pressure Washer you own, the soap dispenser will be located in the front or back. If your Pressure Washer has a feed tube, it's important that when you put the cap back on, that the tube is pushed all the way to the bottom of the…
Last update: 29/08/2023, 12:37
Ryobi 36V Battery reads fully charged but won’t work in my tool
Firstly, put the battery in another tool to check that the fault lies with the battery and not the tool. Next, check that the terminals on your battery and tool are free from any debris or dirt. If you do find that your battery or tool needs to be…
Last update: 15/11/2022, 11:12
Why is my RYOBI 36V battery is flashing?
If all LEDs are flashing or if the first and last LED are flashing, this could indicate that the battery has overheated. Allow your battery to cool before attempting to charge or use it in a tool. (Cooling could take between 15-20 minutes, depending…
Last update: 15/11/2022, 11:23