How can we help?

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Bit slips out of RYOBI Drill Driver when driving screws

Bits can slip if the tips are very worn or are poor quality. Try inspecting the tip of the Bit to ensure it is not excessively worn. You should also make sure you're using the correct Bit for the fastener. Refer to the fastener packaging for correct…

Last update: 22/08/2022, 17:09

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Can't tighten Drill Driver Bit in RYOBI Drill Driver chuck

The chuck securing screw has potentially loosened - tighten to avoid dropping Bits all the way into the bottom of the chuck. Depending on the type of chuck, make sure when tightening that the Bit is seated on the chuck jaws with equal seating /…

Last update: 03/02/2023, 16:01

• Blowers & Garden Vacuums
• Leaf Blowers
• Troubleshooting

What to do if 18V or 36V RYOBI Blower doesn't work

First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.

Last update: 14/07/2023, 11:04

• Pressure Washers
• Pressure Washers
• Troubleshooting

RYOBI 36V Pressure Washer won't start

There could be several reasons why your RYOBI 36V Pressure Washer won't start. Here are some common troubleshooting steps to help you identify and potentially fix the issue.

Last update: 25/09/2023, 13:53