How can we help?

• Biscuit Joiners
• Biscuit Joiners
• Troubleshooting

RYOBI Biscuit Joiner not cutting well

If your Biscuit Joiner isn't cutting to the desired results, check your blade for any obvious signs of damage or wear and tear (such as broken blade teeth), which can lead to a poor cut and may need replacing.

Last update: 22/08/2022, 17:07

• Chainsaws & Pruning Saws
• Pruning Saws
• Troubleshooting

Why doesn't my RYOBI Pole Pruner battery last?

Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged battery. The larger the battery, the longer the chainsaw will run…

Last update: 20/09/2022, 14:49

• Chainsaws & Pruning Saws
• Pruning Saws
• Troubleshooting

Why is my 18V/36V RYOBI Pole Pruner not starting?

If your 18V or 36V RYOBI Pole Pruner isn't starting, it may be your battery - check your battery’s charge level indicator to ensure it's fully charged, check the battery is seated correctly and make sure the battery isn't too hot. Also, make sure…

Last update: 20/09/2022, 14:50

• Chainsaws & Pruning Saws
• Pruning Saws
• Troubleshooting

Why is my 18V/36V RYOBI Pole Pruner charger is not working?

If your 18V or 36V RYOBI Pole Pruner charger isn't working, make sure your battery is correctly inserted in charger, and that the battery isn’t hot. RYOBI batteries have overheat protection built into them. If the battery is too hot the charger will…

Last update: 20/09/2022, 14:52

• Chainsaws & Pruning Saws
• Pruning Saws
• Troubleshooting

Why does my 18V/36V RYOBI Pole Pruner leak oil when not in use?

Oil leaking is a common occurrence and does not signify an issue with your Pruner. Oil is pumped through grooves around the chain bar to ensure the chain and bar are lubricated correctly. Therefore it’s common and expected to have oil left in these…

Last update: 20/09/2022, 14:53

• Pressure Washers
• Pressure Washers
• Application

RYOBI Pressure Washer has low or no water pressure

Discover step-by-step solutions for fixing low or no water pressure issues in your RYOBI Pressure Washer.

Last update: 20/10/2023, 08:50

Troubleshoot RYOBI Pressure Washer that won't dispense soap

If your RYOBI Pressure Washer won’t dispense soap, ensure that your lance is set to low pressure. To do so, twist the end of the lance and open it to its widest setting to allow a greater water flow at a decreased pressure. Then allow up to 45…

Last update: 15/09/2022, 12:09