How can we help?

• Biscuit Joiners
• Biscuit Joiners
• Troubleshooting

RYOBI Biscuit Joiner not cutting well

If your Biscuit Joiner isn't cutting to the desired results, check your blade for any obvious signs of damage or wear and tear (such as broken blade teeth), which can lead to a poor cut and may need replacing.

Last update: 22/08/2022, 17:07

• Pressure Washers
• Pressure Washers
• Application

RYOBI Pressure Washer has low or no water pressure

Discover step-by-step solutions for fixing low or no water pressure issues in your RYOBI Pressure Washer.

Last update: 20/10/2023, 08:50

Troubleshoot RYOBI Pressure Washer that won't dispense soap

If your RYOBI Pressure Washer won’t dispense soap, ensure that your lance is set to low pressure. To do so, twist the end of the lance and open it to its widest setting to allow a greater water flow at a decreased pressure. Then allow up to 45…

Last update: 15/09/2022, 12:09

Troubleshoot RYOBI Pressure Washer that starts then stops straight away

If your RYOBI Pressure Washer starts then stops straight away, check that the tap is turned on fully, and that there’s enough water pressure coming from the water source. Drawing water from sources like a bucket will not provide enough pressure for…

Last update: 15/09/2022, 12:11

Troubleshoot RYOBI Pressure Washer that stops during use

If using for an extended period, it's possible the motor over-heated and the thermal overload switch has activated. Allow time for the motor to cool and then restart. The motor maybe low on power if running extra-long or multiple extension leads…

Last update: 15/09/2022, 12:13

• Pressure Washers
• Pressure Washers
• Troubleshooting

What to do if you can’t disconnect hose from RYOBI Pressure Washer

If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…

Last update: 15/09/2022, 12:16

• Pressure Washers
• Pressure Washers
• Application

How to set up a RYOBI Pressure Washer

Before you start using your Pressure Washer, you have to prime the line. Ensure the machine is in the off position. Turn on the water supply. Squeeze the trigger until you see a night steady stream of water. Once achieved, the system is primed and…

Last update: 29/08/2023, 12:34